|
|
High Precision Brass Wire Cnc Wire Edm Machines |
Technical Specifications |
ITEM |
UNIT |
SPECIFICATION |
MACHINE. |
Size of work table (X, Y) |
mm |
645 x 490 |
Table travel (X, Y, Z axes) |
mm |
400 x 300 x 220 |
Dimension of work tank (LxWxH) |
mm |
990 x 910 x 270 |
Max. size of work piece (LxWxH) |
mm |
850 x 700 x 215 |
U, V axes travel |
mm |
36 x 36 |
Max. taper for 100mm thickness |
° |
+/- 6 |
Max. weight of work piece |
Kg |
250 |
Brass wire diameter |
mm |
Ø0.15 - 0.3, Standard 0.25 |
Capacity of dielectric fluid / dielectric fluid |
Ltr |
300 / D.M. Water |
Filtration |
|
Paper filtration |
Capacity of resin |
Ltr |
20 |
Motors of X, Y, Z axes |
|
AC servo motors |
Motors of U, V axes |
|
Stepper motors |
Best surface finish * |
µRa |
0.6 |
Max. cutting speed* |
mm²/min |
160 |
Max. jog speed |
mm/min |
1200 |
Size of the machine (LxWxH) |
mm |
1700 x 2550 x 2165 |
Weight of the machine |
Kg |
2500 |
Floor space required (LxW) |
mm |
2200 x 3300 |
GENERATOR |
Display |
|
15" LCD monitor |
Controlling axes |
|
5 axes, 4 axes simultaneously |
Interppolation |
|
Linear and circular |
Min. input |
mm |
0.001 |
Max. input |
mm |
9999.999 |
Input |
|
MDI / USB / Keyboard |
Total power |
KVA |
7 |
Standard power supply |
|
415V / 3 Phase / 50 Hz |
Max. working current |
Amp |
25 |
WORKING ENVIRONMENT. |
Standard room temperature for better accuracy |
°C |
20 +/- 3 |
Temperature allowed |
°C |
15 - 30 |
Humidity |
% |
40 - 80 |
|
Main Features |
- High speed, high precision CNC wire EDM
- 5 axes CNC (Simultaneously 4 axes)
- Windows based operating system
- High precision L.M. guide ways for X,Y,U,V and Z axes
- Precision and ground C3 class ball screwa for X, Y axes
- In built programme generation software
- Auto centre find and edge find, auto wire alignment, auto home point return, morror imaging across X/ Y axes, scale functions.
- Spark alignment, edge finding in 45°, centre finding in 45°, slant hole deflection
- Rotation of programme, proportion zoom
- On line parameter edit facility
- Display of cutting in mm/min, display of machining time
|
- Single block execution
- Special control strategy : none-core cutting, corner control, complex profile cutting.
- Auto alignment of workpiece
- Servo system: Closed loop servo drive with AC servo motors of Jepanees YASKAWA.
- 3D graphic simulation of compplex profiles
- Auto parameter selection
- Save automatically when power OFF and resume operation automatically from the same point when power ON
- Programmng during machining.
- Error message display in real time
- Display index of geometry contour
- Multi pass and multi cavity facility
|
Note: Due to continuous engineering improvements, specifications are subject to change without prior notice
* At Standard test conditions # Chasis
|
|
|
|
|
|
|
|
|
|